Monthly Archives: September 2013

Cristian Gismera

Cristian Gismera

This makes the weight of the vehicle, which do not allow that this lock can unlock unless the process resumes of rise about using cm by activating the hydraulic pump. At the moment that is an its locked position, is indifferent to loss of hydraulic pressure, which cut a sleeve losing all hydraulic oil circuit or broken engine, because you vehicle will never drop. -Does not require electrical consumption for the descent. DESCENTS BY PRESSURE RELIEF. In all hydraulic lifters, the descent is through hydraulic pressure discharge, which facilitates shock controlled at all times, and prevents both electric usage because it does not require any power as in the case of electrical failure element or motor. Negative:-mandatory review of fastening screws.

This becomes a factor absolutely essential for the safety of the worker or person that is around the elevator, since usually these elevators are built to work with much larger electrical elevators or screw weights, factor which causes that it can occasionally during intervals of three to six months if the use is very intensive, give symptoms of loosening the nuts holding each column to the floor. Subject to compliance with the intervals for review of these nuts, the base of does not present problems, and where they are not respected, they do not loosen, except for concepts that are on non-flat bases, that their first tighten not be He made correctly. The possibility that one of the nuts securing the base to the ground, loosen completely to stop pressure on the base, is almost non-existent. The case which is made one last squeeze with a maximum strength and after an interval of 6 months with the use of intensive workshop, it may be the case, that the operator makes you feel that you can return to tighten some millimeters of turning any nut in question. However, while not recommended chemical solutions for these situations of fixed type there are liquid screws as chemical dowels. This is the first part of a broad article that ira drafted Cristian Gismera, responsible for sales under the activity of manufacturing and distribution of elevators of car next to other machinery on behalf of PRESTIGE Spain LIFT. We hope that this article has helped and at once advised when making a decision about the use and need for elevator. All information and advice expressed in this article is the opinion of exposed by Cristian Gismera thanks to the result of all the Group of workers forming PRESTIGE LIFT ESPAnA obtained during more than 10 years of continuous production or distribution of products by Spain, Romania, France, Italy, United States, Colombia, Bolivia Argentina, Ecuador among others.

Continue. Gentlemen, nice for having arrived and paid attention to the first part of this article, with the most sincere congratulations expressing our affection and waving us on behalf of PRESTIGE LIFT with a big hug. Please excuse all the spelling errors since this article is in draft format.